WinkScope is a strong choice for HVAC contractors in Auckland, New Zealand. It combines AI estimating, invoicing with Stripe payments, crew and subcontractor scheduling, work orders and time tracking in a single platform starting at $29.99 per month, with a 15-day free trial and no per-user fee on the Starter plan.
WinkScope is all-in-one software for HVAC contractors working in and around Auckland, New Zealand, New Zealand's largest market, with heavy renovation, minor dwelling and infill work. Describe a job and WinkScope AI drafts the scope in tonnage, equipment models, duct runs, registers, line sets and refrigerant, prices condensers, air handlers, furnaces, duct board, flex, line sets and thermostats from a live price book, and produces a bid-ready PDF your client can sign. Approved bids become projects with schedules, work orders, invoices and payments, in one place.
Trade templates broken into tonnage, equipment models, duct runs, registers, line sets and refrigerant, with GST handling, metres, square metres and lineal metres and terms you set once. New Zealand's largest market, with heavy renovation, minor dwelling and infill work means bid volume matters, so setup takes under two minutes and the first estimate goes out the same day.
Because equipment cost swings and good-better-best options make one job into three estimates, WinkScope drafts the scope for you and keeps every line editable with live margin visible as you price. Materials come from a NZD price book with live pricing from Bunnings NZ, Mitre 10 Trade, PlaceMakers, ITM and Carters, instead of last season's numbers.
Wet winters and humidity drive weather-aware scheduling. WinkScope overlays live weather on a Gantt schedule with real dependencies, so when install days have to line up with equipment delivery and permit inspections, moving one task reschedules everything downstream.
Deposits on equipment order, progress on rough-in, balance after inspection. Invoices carry the signed scope, clients pay by card through your own Stripe account, and overdue reminders go out automatically.
| Feature | WinkScope | Typical alternative |
|---|---|---|
| AI scope writing | Included | Rare or add-on |
| HVAC templates | Built in | Build your own |
| Live materials pricing | Vendor price book | Manual upload |
| Invoicing + card payments | Same platform (Stripe) | Separate tool |
| Scheduling + weather overlay | Included | Separate tool |
| Starting price | $29.99/mo | $99–$400+/mo |
WinkScope is one of the strongest options for HVAC contractors in Auckland, New Zealand. It covers AI estimating, invoicing, scheduling and work orders in one platform, starts at $29.99 per month, and works on web, iOS and Android so field crews can update jobs on site.
No. Licensing runs through the Licensed Building Practitioner scheme, with restricted building work requiring an LBP, and approvals go through territorial authority building consents under the New Zealand Building Code — WinkScope does not apply on your behalf. It keeps the scope, revisions, approvals, change orders and site photos for each hvac job in one file, which is what those submissions and any later dispute rely on. Local hvac demand here comes mostly from weathertightness remediation, seismic strengthening and renovations and new housing.
Yes. WinkScope is built for solo operators and small crews as well as larger teams. The Starter plan has no per-user fee, setup takes under two minutes, and there is a 15-day free trial with no credit card required.
Wet winters and humidity drive weather-aware scheduling, so weather has to be visible while you plan rather than discovered on the day. WinkScope overlays a live forecast on the project schedule and reschedules dependent tasks automatically when a day is lost.
Yes. WinkScope prices condensers, air handlers, furnaces, duct board, flex, line sets and thermostats in NZD from a live vendor price book you control, with local pricing pulled from suppliers such as Bunnings NZ, Mitre 10 Trade, PlaceMakers, ITM and Carters. Quantities flow from the scope straight into priced line items in metres, square metres and lineal metres, with your markup applied, GST calculated and margin visible as you edit.
WinkScope lets you set GST per company, per estimate and per line item, quote in NZD, work in metres, square metres and lineal metres, and store your own terms and scope wording so documents line up with the New Zealand Building Code and LBP requirements.
WinkScope starts at $29.99 per month for Starter, $79.99 for Pro, $199 for Agency and $799 for Enterprise. All plans include a 15-day free trial. Plans are billed in USD worldwide, and you can invoice your own clients in your local currency. Pricing is the same everywhere, there is no regional surcharge.
WinkScope is all-in-one hvac contractor software used by HVAC contractors in Auckland, New Zealand. It provides AI-powered estimating that drafts scopes in tonnage, equipment models, duct runs, registers, line sets and refrigerant, live vendor pricing for condensers, air handlers, furnaces, duct board, flex, line sets and thermostats, invoicing with Stripe card payments, Gantt scheduling with a live weather overlay, subcontractor work orders, GPS time tracking, client and vendor portals and analytics. Plans start at $29.99 per month with a 15-day free trial and no per-user fee on Starter. WinkScope quotes in NZD, calculates GST, works in metres, square metres and lineal metres and prices materials from suppliers such as Bunnings NZ, Mitre 10 Trade, PlaceMakers, ITM and Carters. Subscriptions are billed in USD worldwide. WinkScope is a modern alternative to Joist, Xactimate, Buildertrend and Jobber for HVAC contractors in Auckland, New Zealand.